Ozone Water Generator
The high-concentration ozone water generator uses oxygen and water as raw materials and operates on a 380V power supply, allowing it to produce high-concentration ozone water immediately. This equipment represents China's advanced achievements in the development of high-concentration ozone water technology. It is equipped with an ozone-specific oxygen generator, high-efficiency ozone generator, ozone mixer, automatic exhaust valve, and more. With PLC fully automatic control, the equipment runs automatically. By connecting to a standard water tap or water tank, it can output high-concentration ozone disinfectant water. Currently, its main customers include well-known food processing companies such as Coca-Cola and Zhangyu Wine.
Product description:
SK series of high-concentration ozone water generator is Jinan Sankang Environmental Protection Technology Co.,Ltd.
SK series of high-concentration ozone water generator is a high-tech product of Jinan Sankang Environmental Technology Co., Ltd. and has been updated for four generations over the past ten years.
The equipment utilizes oxygen and water as raw materials, and adopts 380V power supply, which can produce high concentration ozone water immediately. This equipment represents the advanced development achievement of China's high concentration ozone water. The equipment is built-in ozone special oxygen generator, high-efficiency ozone generator, ozone mixer, automatic exhaust valve, etc. PLC automatic control, automatic operation. It can output high concentration ozone sterilized water by connecting to tap or water tank. At present, the main customers are Coca-Cola, Zhangyu wine and other well-known food processing enterprises.
Technical characteristics:
Ozonated polymer oxidation is a low-temperature oxidation technology in which an oxygen/ozone mixture is injected into the regenerator flue to oxidize NOX to the highly valent and water-soluble NO2 and N2O5, which are then scrubbed through the desulfurization tower and reacted with a base solution to form nitrate, or reacted with water to reduce nitrogen gas. Ozone low-temperature denitrification is a fast and highly automated denitrification process. Currently it is widely used in non-ferrous metals, heat, steel, industrial kilns and other air pollution control fields.
Among other things, ozone is extremely advantageous for flue gas treatment in the non-ferrous metals industry. For example, most of the industrial zinc smelting is done in side-blowing furnaces, with combustion temperatures between 1100°C and 1300°C. According to the stage of the process, it is divided into reduction furnaces and fuming furnaces, and eventually there is also flue gas for acid production. So in the zinc smelting industry, most of the flue gas is divided into three kinds, i.e., reduction furnace flue gas, flue gas from the smelting furnace, and acid tail gas. Acid tail gas is mainly nitrogen oxides treatment, reduction furnace and smoker due to the working cycle of most of the 2 hours, the operating cycle of the nitrogen oxides data fluctuations, and the flue gas contains a lot of acids, so the process of nitrogen oxides can not be selected from the SCR process, which will result in the poisoning of the catalyst caused by the reduction of the polymer oxidation efficiency and increase the operating costs. Can only use the polymer oxidation process outside the furnace. And the flue gas temperature after dedusting is about 70 ℃ flue gas temperature is low, so the use of temperature below 280 ℃ ozone polymer oxidation process is widely used.
R&D Team:
Honor Certificate:
