How to choose a high quality ozone generator

The power supply for ozone generators using this discharge technology utilizes medium frequency, fully controllable rectification technology. The current ozone generator design can be from 100g / h to 100kg / h. Which can use enamel and glass two kinds of media as a dielectric material, power supply design applications around the transformer manufacturing and technology to design.

1. The discharge chamber adopts cellular discharge technology.

The ozone generator special power supply using this discharge technology adopts medium frequency, fully controllable rectification technology. At present, the ozone generator can be designed from 100g/h to 100kg/h, which can be enameled and glass two kinds of media as the dielectric material, power supply design applications around the transformer manufacturing and technology to design.

Many customers in the selection of ozone generator power consumption and concentration of understanding is not very accurate, ozone generator power consumption and its ozone concentration is inextricably linked, in the same discharge area, cooling water temperature and discharge chamber stable capacitance value, not the greater the power, the higher the concentration of the intervening period to have a suitable optimal value, the value of the value of the ozone manufacturer is often only experienced to the final value of the calculation This value often only experienced ozone manufacturers can account for the final value to come up with the most accurate final power consumption. Under normal circumstances, the higher the concentration, the greater the power consumption ratio per kilogram of ozone.

Therefore, when a manufacturer's product leaves the factory, the final field test calibration value is the most accurate (within the range of national industry standards) to be qualified.

2. Special dielectric materials

Single tube of higher efficiency ozone manufacturers will generally use a combination of unit manufacturing products, general production in less than 300g ozone generator will be used in this way, this technology developed by the long service life of the product, but there are also uneven distribution of water and gas distribution, the power transformer a tow a model of some of the issues caused.

1 discharge unit temperature is not consistent 2 discharge unit into the air flow pressure can not do absolutely uniform, using variable frequency power supply such as shielding is not done well, the power supply between the magnetic field effect is large, resulting in a large power transformer heat, will greatly affect the service life of the ozone generator, especially in humid environments, which will result in a certain amount of potential safety hazards.

Manufacturers of the above two cases, the quality of the air source should be high, air source equipment should pay attention to the altitude, ambient temperature and humidity of the problem, the air source dew point problem. So when selecting the type of air separation equipment, you should try to choose the imported brands.

3. Ozone Manufacturers of Plate and Tube Along Surface Discharge

Generally manufactured as small micro-ozone equipment. Due to cost issues, dielectric materials for power supply requirements are not very high, often on the low material. Because the process is simple, low-tech, low-cost, product ozone concentration, yield can not be accurately determined. It is generally recommended to do some household disinfection products. These use a short life, the amount of generation is not accurate, often applied with household ozone sterilization products.

In order to ensure product utility, economic, please use large-scale continuous operation of the ozone equipment should pay attention to the ozone generator configuration.